Share tips on maintenance of Motorcycle Trunk

-

 The Motorcycle Trunk is a convenient and fast means of transportation, which is widely used in patrolling, passenger and cargo transportation, etc., and is also used as a sports equipment. I believe that people who like to ride Motorcycle Trunks cherish their cars, and correct maintenance methods are extremely important. Let's learn a few little knowledge about Motorcycle Trunk maintenance.

Motorcycle Tail Kit

1. The friction period
The running-in period of the Motorcycle Trunk is a very critical stage. The running-in period of the first 1500 kilometers of the newly purchased Motorcycle Trunk is very important. At this stage, it is recommended not to use the Motorcycle Trunk with full load, and the speed of each gear should not exceed this gear as much as possible. limit, which can improve the service life of the Motorcycle Trunk.
2. Preheat
When riding a Motorcycle Trunk in summer, generally preheat it for about 1 minute in advance, and more than 3 minutes in winter is better, so as to protect the various parts of the Motorcycle Trunk. When warming up the Motorcycle Trunk, it should be carried out at idle speed or at low throttle speed. During preheating, the damper and throttle can be used to maintain the preheating without turning off the engine. The preheating time should not be too long. When the engine is a little warm, you can pull the damper first (to prevent flameout), and drive slowly at a low speed for a while, and if the engine running condition gradually stabilizes on the way, pull back the damper to drive normally. Do not hit the car with high throttle when warming up, otherwise it will increase the wear and tear of the engine and may even cause serious failure.
3. Clean
When riding a motorcycle, pay attention to frequent cleaning to reduce the accumulation of dust in the trunk of the motorcycle and improve the use of the trunk of the motorcycle.

评论

发表评论

此博客中的热门博文

The HFSecurity Team Visits Partners in Ghana, Deepening Its Presence in the African Market and Facilitating the Implementation of Biometric Technology

-
图片
  Recently, the team from Chongqing Huifan Technology Co., Ltd.—a biometric technology enterprise operating under the international brand "HFSecurity"—arrived in Ghana immediately after attending the ID4Africa 2026 exhibition in Abidjan, Côte d'Ivoire. Without missing a beat, they embarked on a series of in-depth client visits and on-site project surveys, thereby fulfilling their market commitment to "take root in Africa and serve local communities" through concrete action. During their time in Ghana, the team visited numerous financial institutions, educational establishments, and partners involved in identity registration projects. At bank counters, real-name authentication terminals were operating with high efficiency; on university campuses, palm-vein recognition access gates were streamlining entry and exit management for students and faculty; and in remote regions, portable biometric data collection devices were shouldering the critical task of identity re...
阅读全文

The role of Neoprene Zipper Cable Sleeve in wire and cable

-
图片
  Cables are mainly composed of three basic structural elements: a conductive core, an insulation layer and a sheath layer. It is mainly composed of three basic structural elements: conductive core, insulating layer and sheath layer. There is no strict boundary between wires and cables, but in a broad sense, cables have complex structures and complex sheaths, while wires have relatively simple structures. Some only have a conductor and an insulating layer, and some only have a waxed light protective layer or a light soft protective layer. The conductive core of the wire and cable is used to transmit electric current. In order to reduce power loss and voltage drop, the conductive wire core is generally made of copper and aluminum with high conductivity. The function of the insulating layer is to prevent the current from leaking in the radial direction and ensure the safety of use. Therefore, the insulating layer is required to have good electrical insulation properties. Heat resista...
阅读全文

Connecting Global Business Opportunities and Expanding Sister-City Trade! Cheyigou Makes Its Debut at the Chongqing International Sister Cities Cooper

-
图片
  On May 20, 2026, the Chongqing International Sister Cities Cooperation Conference was grandly held in Chongqing. As a leader in Chongqing’s emerging foreign trade sectors, Chongqing Cheyigo Import & Export Trading Co., Ltd. (hereinafter referred to as "Cheyigo," with the international brand name "Cheyigo") was invited to attend a core segment of the conference—the "Sister Cities Economic and Trade Cooperation Matchmaking Forum." At this event, the company showcased the "Chongqing Power" behind China's exports of used and modified vehicles to sister cities around the globe. The conference, themed "Deepening Sister City Cooperation and Jointly Promoting Open Development," brought together city representatives and economic and trade elites from numerous countries and regions worldwide. As a benchmark enterprise in China's used and modified vehicle export industry, Cheyigo fully leveraged this high-level international platform...
阅读全文